Arduino Will Not Show up on Serial Port–How to Install Arduino USB Drivers in Windows 7 on a PC or on VirtualBox

Arduino-Will-Not-Show-Up-On-Serial-Ports-Windows-7
Arduino Will Not Show Up On Serial Ports Windows 7
I purchased the Kip Kay Arduino Kit and assembled it and when I got to the Part 2 > Step 9 Checkpoint I could not get the board to show up on my computer in the Arduino Software!!  I tried it on a virtual machine and it saw the device in the USB port list but the Arduino software still didn’t list a COM serial port.  I learned that I’m having this error because of a change FTDI did to their drivers to combat clones or counterfeit Chinese chips and it’s messing all kinds of things up, real FTDI chips included and that is why it isn’t recognized.  You can make it work, you just need to manually install the drivers.  I don’t know how to do it on a Mac but I did find a video on youtube by a German guy speaking English with a German Windows 7 machine.  I dislike video tutorials of step-by-step computer stuff and find them hard to follow (rewinding and pressing pause all the time) so I decided to put all the steps out there for you to follow with lots of screen shots from when I did it myself.

Arduino Will Not Show up on Serial Port–How to Install Arduino USB Drivers in Windows 7 on a PC or on VirtualBox

If you are on a physical Windows 7 PC simply skip down to Step 2.

Step 1: Connect your Arduino to your Windows 7 VirtualBox machine.

Start up your Windows 7 VirtualBox and plug your Arduino into your Mac.   Then click on the usb icon on the lower right corer of the Virtual machine window and make sure that “FTDI FT232R USB UART [0600]” is checked as seen below:

Device Manager-FT232R USB UART in Other devices
Device Manager-FT232R USB UART in Other devices

Step 2:  Download the drivers

Search for FTD drivers at: https://www.ftdichip.com/old2020/Products/ICs/FT232R.htm

Step 3: Extract the zip file of the drivers into a folder on your desktop.

I’ll call the folder CDM:

FTDI drivers extracted to a folder on the desktop called CDM

If you are on Windows 7 you simply double click the zip file which just “opens” the zip file like it is a folder.  Then click and drag the contents into another folder you must create on the desktop, I called it CDM.

Step 4: Click on the Start Menu and then right click on “Computer” and click on Properties.

Start Menu > Right Click on “Computer” > Click on Properties

Step 5: Open the “Device Manager.”

Click on “Device Manager” in the Computer Properties:

Click on Device Manager

Step 6: Locate the FT232R USB UART device in the device manager list:

Device Manager: FT232R USB UART

Step 7: Right click on “FT232R USB UART” and click on properties.

Right-Click on “FT232R USB UART” and click on Properties

Step 8: Click on the “Driver” tab of the Properties window and then click on the “Update Driver…” button:

Click on the “Driver” tab and then click the “Update Driver…” button

Step 9: Click on “Browse my computer for driver software”:

Click on “Browse my computer for driver software” in the Update Driver Window

Step 10: Click on “Let me pick from a list of device drivers on my computer”

Click on “Let me pick from a list of device drivers on my computer”

Step 11: Click on “Show All Devices” (should be automatically selected) and the click the “Next” button:

Click on “Show All Devices” and then Click the “Next” button

Step 12: Click the “Have Disk” Button:

Click the “Have Disk” button

Step 13: Click the “Browse” button:

Click the “Browse” button

Step 14: Browse to the location of the drivers.

Click on the “Desktop” Icon in the left window and browse to the folder you extracted the drivers into in step 3 and then open the folder that holds the drivers:

Browse to the folder where you extracted the drivers in Step 3

Step 15: Click on the ftdibus file and click the “Open” button.

Note, the file may be called ftdibus.inf if you have the preference turned on to show known file extensions:

Click on the ftdibus.inf file and click the Open Button

Click on the “OK” button in the resulting window that pops up:

Click on the “OK” button

Step 16: Select “USB Serial Convertor” from the list and click the “Next” button:

Click on “USB Serial Converter” in the list and click the “Next” button

Step 17: Click “Yes” to override the warning window.

It is warning you that Window cannot verify this driver (you get this error because it is a cloned Arduino board and the driver is unsigned):

Click the “Yes” button to move on

Step 18: Wait a while.

It will take a little while for the driver to install and then if you are successful you will get the following message, which you can click the “Close” button:

Click “Close” to finish installing the Serial Converter

Click the “Close” button to close the USB Serial Converter Properties window:

Step 19: Back in the Device Manager Window right-click on “USB Serial Port” and Click on “Properties”:

In Device Manager Right-Click on “USB Serial Port” and Click on “Properties”

Step 20: Click on the Driver tab and click the “Driver Update…” button:

Click on the “Driver” tab and then click the “Update Driver…” button

Step 21: Click on “Browse my computer for driver software”

Click on “Browse my computer for driver software” again

Step 22: Click on “Let me pick from a list of device drivers on my computer”

Click on “Let me pick from a list of device drivers on my computer”

Step 23: Click “Show All Devices” and click the next button:

Click on “Show All Devices” and click the “Next” button

Step 24: Click on the “Have Disk” button:

Click on the “Have Disk” button

Step 25: Click on the “Browse” button, and browse to the same folder you browsed to in Step 14:

Click on the “Browse” button
Browse to the driver folder on the desktop

Step 26: Click on “ftdiport” and click the “Open” button:

Click on the file “ftdiport” and click the “Open” button

Click the “OK” button to install from disk:

Click the “OK” button to install from the disk location you chose

Step 27: Select “USB Serial Port” from the list and click the “Next” button:

Click on “USB Serial Port” in the list and then click the “Next” button

Click the “Yes” button to go past the unsigned driver warning message:

Click the “Yes” button again to go past the Unsigned Driver Warning Message

You will get this window if you are successful and you can click the “Close” button:

Driver successfully installed message

You can then close the USB Serial Port Window by clicking the “Close” button:

Close the USB Serial Port Window

You will see this if you are successful:

You will see the USB Serial Port listed if you are successful

And now if you launch the Arduino software and click on Tools > Port you will see the COM port listed.  Success!

The break-out board shows up now on COM4!

Other relevant information on this issue:

Amazon Associate Disclosure: As an Amazon Associate I earn from qualifying purchases. This means if you click on an affiliate link and purchase the item, I will receive an affiliate commission. The price of the item is the same whether it is an affiliate link or not. Regardless, I only recommend products or services I believe will add value to Share Your Repair readers. By using the affiliate links, you are helping support Share Your Repair, and I genuinely appreciate your support.

Written By
More from John Mueller
How to Install AdBlock for Chrome in Windows 8
This post comes in a series of posts all along the theme...
Read More

Leave a Reply

Your email address will not be published. Required fields are marked *